Reverse Gear for now

I have a confession to make!  In my last blog post, I talked about making without outcomes.  That's one of my goals for 2022.

Lets back up to late 2021, when I had the opposite experience (which probably motivated the 'create without outcomes' mantra).  I am participating in a printmaking swap, where each artist is required to manipulate/alter another artists' print.

Each artist prints two identical prints.  One of those prints remains in its original state, the other is sent to another artist who then 'owns' that print and uses it as a starting point to print over or alter using printmaking processes.

This has probably been the most challenging outcome-focussed work I've ever done.  I didn't realise how much hesitation and fear is associated with touching someone else's work.  I felt like I was teetering on the edge of a cliff - I MUST do something to resolve an artwork on top of another's work with a looming deadline.

This is the print I was allocated -

Lino print using gray ink by Renee

I worked my way through all the options... work around the image?  work on top of the image?  Ignore the whole thing and just print dark over the top?

My signature printmaking technique is monotype, with lots of mark making, textures and colours.  This just wouldn't do, it would be so busy and everything would clash.  I thought about working around the bird image but its pale gray colour wouldn't provide a good focal point.

So I decided to go with collage, incorporating some basic monotypes and a lithograph bird for a focal point.  Collage also makes good use of existing prints in my stash, but for this one I needed a bird print on toned paper so I used an existing litho polyester plate to make some curlew prints.

Printing on Kozo, love that fleck

It takes a few prints to
get one or two that are good enough

I opted to use my favourite paper patterns for the monotypes, the transparency of the paper would allow the background lino print to come through without overpowering the curlew image.  I stuck to a neutral colour pallete to make the different elements come together.

After a few heart-stopping moments where the glueing went wrong, with subsequent frenzied peeling off of wet layers, I achieved a result I was happy with. I also had to seal it (the glue left it a bit sticky) and back it with stiffer paper so it didn't warp.  Of course, the image is very far removed from the original lino but that is the idea of the swap.

The prints (both original and altered) will be exhibited in Brisbane at the Logan Regional Gallery and in Victoria at Firestation Gallery later this year.

'Sub-Tropical' - the final print.
Monotype and Lithograph Collage

Detail, you can see the horizontal lino stripes in the background.
They contrast against the vertical lines of the paper patterns.

Listening to Kozo and Kangaroo Grass

Late last year I participated in an international online kozo papermaking workshop with US artist Amy Richard.  Read about it in my blog post HERE.  Amy is offering another round of workshops during May, you can find information on the workshops HERE.

I have made kozo paper both in Australia and Japan, but never from the point of collection of the fibre from the Paper Mulberry tree, so Amy's workshop was very enlightening as to the whole process.

From the kozo paper that I have made, I created an artist book.  I wanted to capture both the long meditative process of kozo papermaking with the soft rustling sound of kangaroo grass heads waving in the breeze.  Kangaroo grass is a native grass that I grow in my garden - its leaves make nice paper and the seed heads are wonderful to use in my monoprinting.

For this book, I chose white oil based etching ink.  Oil based for a long drying time which extends my working time, and white so that I could play with the idea of ephemerality and the gorgeous transparency of the paper.

I have titled the book 'Silent : Listen' which is from a poem I wrote during a kayaking trip amongst the mangroves:

I cut through

jagged reflections

drifting

silent

then with the exhale

of the full tide

my ears 

mouth

listen

Even though the poem describes a moment in a kayak journey, it also speaks about the healing power of listening.

And this is my artist statement:

This long landscape format book is a meditation on the beauty of the kozo fibre and the native Kangaroo Grass which grows in my garden.  I have gently layered the transparent kozo with the pale ghost imagery of the seed heads waving gracefully in the breeze to honour a quiet moment of contemplation.

I embedded thread into some of the papers 
when I made them.
The grass imagery is printed over the top
when the papers were dry.

The book is a long landscape format
with a machine sewn spine, like a stab
binding.  Its meant to be loose and casual to
reflect its meditation on the grass and fibre.
The long soft pages slow down the
experience of the book.

I machine sewed the book title
which is printed with letterpress.
I'm aiming to print the whole poem in letterpress
one day, just need to get back into
Fiona's studio as I don't have letterpress equipment.
.

Mangroves, Mud and my obsession

I have come to the conclusion that I have a bit of an obsession about mangroves.  I'm drawn to tidal creeks, the sculptural form of prop roots, the tang of decaying leaves in the mud, the song of honeyeaters.  Over the past 12 months, I've been doing a lot of writing about my relationship to mangroves, trying to figure it out, and as a consequence my arts practice has become increasing tied to my sense of self and mangroves in tidal creeks.

My next few blog posts will focus on how I have used words and creative play to explore my experience of these magical but often unappreciated places.

A forest of putrid ugliness.
    
you think it
you say it

but I hear
whispered pulses of the rising tide,
soothing hands stroking the casuarina,
a heron’s beak striking the fingerling,
a lone mangrove seed falling,
                                        falling.

I do my best thinking on my
bike or in my kayak,
the notebook is always ready!

Cotton Tree leaves - my
other obsession!

Cotton Tree leaf drawing -
coloured pencil and white pen
on toned paper

Work in Progress - using watercolour
over the top of a rejected monoprint.
I used myself-made colour chart to
figure out what colour would
sit best against the busy background.

Completed artwork (detail photo)

Another one - using ochre colours

Watercolour Leaf Printing

I knew there was a reason I'm a facebook user..... I ignore all of the depressing news stuff and follow some very interesting art related groups.  These groups bring together like-minded people who post all sorts of photos and information about what they doing in their art studios.  Sometimes I find some particularly tempting techniques, such as leaf printing using watercolours.

I give my acknowledgements and thanks to Karen Rush who posted in Craft Press Printmakers facebook group, where she introduced this technique that she learned from Rebecca Chamlee of Pie in the Sky Press.  

Its a straightforward process.  You paint dry leaves with watercolours, let dry, then print onto damp watercolour paper.  Its wonderful that something so simple can produce lovely results, without all the mess and fuss of the usual monoprinting processes.

I've shared this technique a couple of times with friends, and we've had a great time sitting around a table (social distanced of course!) painting, printing, chatting..... and then laughing over the ones that don't quite work.  

I'm grateful that at the moment we can gather together with friends to make art, but if you can't, please try it yourself.  Its a great dining table activity with children or if you have a spare hour or two.

To print the leaves, I used my Xcut diecut machine, but you could use any craft press or manual pasta maker.  You could try hand printing, but you may not get the detail of the veins or it might move around a bit.  Of course you can always 'tweak' the less successful ones with a fine marker pen and more watercolour when it drys.  Nothing is ever wasted!

Two colours on a grevillia leaf.
Leaves with interesting silhouettes and veins are best.

Two or more colours works best.
I put a layer of pink, let it dry a bit, then
added the paynes grey.

Yes this is a print, not the actual leaf!
I've found that the colour improves
after a few prints and re-inkings.
This one started with orange, then a mix of yellow ochre,
sepia then other colours I can't remember....
That's the magic of monoprinting,
it keeps it secrets well!

Beautiful colours and a bit of embossing too.

Applying watercolour, but
keeping water to a minimum because you
need the pigment to be strong.
Let dry before printing.

Another beautiful leaf! 
I think its the one I'm painting in the photo above.
These will make beautiful cards - I use double
sided tape to mount the print onto coloured card.

Sharing Nature Sketchbooks

Covid-19 restrictions on gatherings have eased in Queensland, for a while perhaps, so I'm finally able to offer face-to-face workshops again.  I'm so grateful for the opportunity to get back into running workshops in this 'new normal' world of hand sanitiser and social distancing.

I'm currently facilitating a series of 'Mixed Media Nature Sketchbook' workshops, combining gelatine plate monoprinting with drawing and watercolours in a concertina format.  Its a technique I've developed to combine my love of printmaking with the intimacy of sketching.  My books are always centered on a personal experience of place, usually involved with travel to national parks or coastal areas.  

The following photos highlight the results of two of my recent workshops, I hope you enjoy the imagery as much as my workshop participants did!

My work, a workshop demonstration

My work, scribbly gum inspired, workshop demonstration

Student work, I love the watercolour work on this one.
Viridian green can be hard to work with, but it really makes the work pop

Student work, guess what her favourite colours are!
I love seeing colour combinations that are so different to my own.

Student work, in progress.
This book was inspired by wattle trees.

Student work, wonderful to see them all at the end of the workshop!

Beautiful work girls!  A lovely day out for a group of like-minded friends.

The Artist is in Residence - Exploring the Mangroves and Tidal Zones

How's your lockdown/stay-at-home time going?  I'm continuing with my self-residency @ home daydream.....

Since I 'returned' from my virtual lithographic residency in the mountain rainforest (see last week's POST), I've been lurking around tidal zones amongst the mangroves and mud.  It's a favourite place of mine, with lots of childhood memories associated with it.

We've been out on our kayaks a couple of times in the past week, luckily kayaking for fitness is allowed under the lockdown laws!

So this week at my self-residency @ home I decided to finish off a project.  It was intended for an exhibition in June, but that has of course been postponed, but its time I resolved the artwork.

To get you in the mood and so you can fully appreciate my headspace in this week's residency project, here's a short video of me out on the water in my kayak.  It might give you a feel of the moment I'm blissfully just floating along listening to the birds.  If the video doesn't play via your email feed, you can view it directly on my BLOG or Instagram feed.

The work I completed this week is some 3D sculptures of mangrove seeds.  I wanted to have larger-than-life seeds to hang on the wall, featuring monoprints using leaves from the tidal zones.  The scultpures will sit alongside some other works on paper that I started in this blog HERE.

So my first step was to print lots of monoprints on lightweight papers, such as tissue and japanese kozo. Its great fun and freeing to randomly print without worrying about composition.  I used my oil-based inks and my Xcut press for maximum colour and detail. Here are a few samples:

The next step was to make the mangrove seeds.  I created wire and paper frameworks then covered them in a product called Paper Magiclay.  Its a lovely soft flexible product that air dries.  It was a fun process recreating my large seed models based on the shapes of actual seed pods.  I inserted small loops of wire on the back so the seeds can seamlessly hang on the wall, like they're floating.

I then tore my prints into small pieces and glued them onto the paper seeds, in a paper mache-like style.  I used a mixture of Yamanto japanese glue and PVA.  I painted the seed tips with acrylic paint and I also printed using my gelatine plate over the top in sections to add some more detail.  More is better!

In progress

The final step this week was to apply encaustic wax, to seal the work and give it a rich dimensional look.  This is a 2 step process - applying liquid wax then fixing it with a heat gun.  Drippy, messy fun!

I melt my wax in tins in a skillet filled with water, on a low heat
setting.  I use unrefined beeswax that I source from farmers markets.

Applying heat to the wax melts it into the paper
and makes it transparent.

The end result is some interesting representations of the mangrove seed.  I like the layers of prints using leaves from the tidal zones on top of the seed structure, as a kind of representation of the connection of the different elements from the tidal zone.

I'm happy with the completed works, hopefully they will get selected and exhibited when the galleries are open again.  In the meantime, they'll hang on my wall, assuming I manage to find a spot amongst all the other artworks!

The finished works.
The longest one measures 64cm.

Amongst the Mangroves

As an artist I get obsessed about things.  My latest obsession (and distraction) are the seeds of the Red Mangroves.  These can be found bobbing around our local mangrove creeks and in tidal flows.

My obsession really started during a recent kayaking trip to North Stradbroke Island.  The waters there are clear with lots of marine animals, invertebrates and plants - a wealth of inspiration and interest to an artist like me.

The selfie stick comes in handy when kayaking !
I'm hoping that I don't drop my phone in the water
as I take the photo....

Paddling up a beautiful little creek off Amity Point.
Can you feel the serenity and peacefulness from the photo?

I love the prop roots of the Red Mangrove.
So architectural!
Perhaps my next obsession.....?

Just passing by a mangrove tree at high tide and spotted
these little guys, difficult to photograph because
they kept moving around the other side of the tree from me.

I jumped out of the kayak at a sandbank to photograph the beautiful
mangrove seeds that have dropped from the trees.
This one still has its 'cap' on.

Here is a bit of information about the Red Mangrove Seed -

Flowering occurs in winter, with the production of a single-seeded, brown, oval-shaped fleshy fruit during summer.

Seeds germinate on the tree (vivipary), which results in the appearance of a long, green, rounded propagule (seedling) about 30 cm long. The propagule protrudes through the wall of the fruit to hang vertically beneath it. This buoyant germinated seed is the first stage of the root system.

- Qld Govt, Department of Agriculture & Fisheries 

Tidal detritus on the sandbank - a goldmine
of inspiration and musing....

Back in the studio, playing with drawings of the seeds.
I like the idea of oversized mangrove seeds on
a full sheet of watercolour paper.

More play, this time with monoprint and watercolour.
Didn't quite work but still lots of opportunities to work into it further.
Playing is tough, persistence and keeping an open mind is key.
Not everything works, but it helps to sort things out in my head.

More monotypes, now playing around with the idea of drawing.
I've been obsessed with circles and mandalas lately, so
these are popping up in my latest work as well.

Using drawings from my sketchbook as a reference, I'm
working into my monotype print with a detailed pencil drawing.
I'm using my magnifier to get into the detail. Very handy tool!